Aqara Motion Sensor P1
- In stock, ready to ship
- Inventory on the way
*** Aqara Zigbee 3.0 hub is required
Motion Sensor P1 detects body motion and the state of ambient light. If there are any people moving or any change in the ambient light state in the areas under detection, the motion sensor will send notice to the Aqara Home app through the connected Aqara Zigbee 3.0 Hub or link to other devices.
- Configurable Detection Timeout: Finally, the detection timeout can be configured without any hardware modding. Just set any timeout from 1 to 200 seconds, confirm by pressing the device button, and the P1 won't be stuck for one minute, like before. (Please note: decreasing the detection timeout leads to shorter battery life)
- 5-Year Battery Life*: Thanks to the energy saving technologies and improved batteries, the Motion Sensor P1 now can reach a record five-year battery life, which will make its battery life long even in case of extra-low temperatures or lightning-fast detection timeouts.
- 170° Field of View: Extra wide field of view, 170° for up to 2 meters and 150° for up to 7 meters. Moreover, thanks to its versatile 360-degree stand, the viewing angle can be adjusted so that only the motion in the desired area (e.g., bed or sink) will be detected.
- Zigbee 3.0 Protocol: Enjoy the benefits of the fastest, most stable, and energy-efficient smart home technology. Better stability and compatibility (more standardized protocol), longer support, and more features.
- Future-Proofing via OTA: The sensor now supports OTA updates, which means that new features and fixes can be added after the release of the product.
* 5-year battery life can be achieved with the LED indication function turned off and with detection timeout not less than 30 seconds.
** Aqara Zigbee 3.0 hub and controllers are required for this functionality.
- Fully-automated lighting control
IF a motion in darkness is detected, THEN the Motion Sensor P1 will trigger the smart wall switch to automatically turn on the light.
IF no motion is detected for a long time, THEN it will trigger the smart switch to automatically turn off the light.
(Motion Sensor P1 + Hub + Smart Wall Switch)
- Bed presence detection
Just install the Motion Sensor P1 above the bed, adjust the angle and sensitivity, and you will be able to trigger the “Good night” scene (e.g., close the curtain and turn off the light) automatically and without any privacy concerns.
(Motion Sensor P1 + Hub + Controllers)
- Easy and instant night light control
Thanks to the built-in light sensor, the Motion Sensor P1 can turn on the night light made of an LED strip automatically, when you wake up at night.
(Motion Sensor P1 + Hub + LED Strip Controller or Relay/Switch Module)
Wireless Protocols: Zigbee 3.0
Dimensions: 33.1×33.1×41.6 mm
Operating Temperature: -10°C ~ 55°C (14°F ~ 131°F )
Operating Humidity: 0 ~ 95%RH, no condensation
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power ≤ 13 dBm
What is in the Box: Motion Sensor P1 × 1, Holder × 1, Sticker × 1, User Manual × 1